1999-2001 Yamaha YZF-R1 Lowering Link

  • Model: 49810205
  • Shipping Weight: 0.9lbs
  • 0 Units in Stock


Please Choose:

 Sold Out 

CNC machined 6061-T6 aluminum suspension link (dogbone) for lowering the rear of 1999-2001 Yamaha YZFR1. Use these dogbones to lower your R1 when you find it just a bit hard to touch the ground well or to fit your desire. Keep in mind that it will reduce ground clearance.

These links are made specifically for these models to lower the rear the given amount with an accurate result. They are fitted with factory style needle roller bearings for a higher standard of quality as opposed to cheap bronze bearings. Complete with bearing pins and ready to install.

  • CNC machined 6061-T6 aluminum
  • Made with needle roller bearings like factory
  • Complete with bearing pins, ready to install
  • Fit 99-01 YZF-R1

Available in -1"(2.5cm), -1.5"(3.8cm), -2"(5.1cm), and -3"(7.6cm).

Select your size from the dropdown.

This product was added to our catalog on Friday 15 September, 2017.

Who's Online

There currently are 15 guests online.
Your IP Address is:
Copyright © 2024 Burkhartcycle.com. Powered by Zen Cart